(14) When the Tube cleaning is finished, leave the Filter Cartridge in the Black Ink Cartridge Slot, and then perform the Tube cleaning for other colors by repeating step (9) to (13). (13) When the Tube cleaning is finished, replace the Cleaning Cartridge with the Filter Cartridge again, and then perform the Tube cleaning. Press the OK Button to perform the Tube cleaning. (12) The following message is displayed after the performance of step (10) is finished. (11) When the Tube cleaning is finished, replace the Filter Cartridge with the Cleaning Cartridge. (10) Press the Up/Down Button to select "Black", and then press the OK Button. The procedure is the same for other colors. The following procedure shows the example of removing the "Black" Print Head.(9) Remove the Ink Cartridge whose ink you will drain, and then insert the Filter Cartridge, whose hole you sealed in step (1), into the same Ink Cartridge Slot. (8) Press the Up/Down Button to select "Tube Cleaning", and then press the OK Button. (7) While holding down both the Up and Down Buttons, press the Stop Button. (6) Press the Up/Down Button until "Version" appears. (5) Press the OK Button to display the Menu Display. (4) On the Control Panel, press the Platen Button to eject the Platen if it is not. (3) Make sure GT-541 is not in the middle of any operation. (1) Seal the hole on the Filter Cartridge with adhesive tape, etc.
0 kommentar(er)
