Pull the lever back so that you can spin it 180 degrees and pull back on the shift lever as if you were going into 4th gear to pop it out of the plastic cup at the bottom. Do not misplace the nut and bolt, as they will be reused with the COBB Tuning Shift Lever.ģ. Use the two 12mm boxed end wrenches, one on either side, remove the bolt that holds the shift lever to the shift linkage as shown in the picture below. This will make it easier to work, without scratching the center console or the center console shifter surround trim piece.Ģ. Disconnect the wiring harness for the lighter so that the surround can be placed aside. Pull up on the rear of the center console shifter surround trim piece to remove it from the center console.
Remove the shift knob by unscrewing it counter-clockwise. Phillips Head Screwdriver Flat Head Screwdriver (2) 12mm Wrench (box end preferred) 10mm Socket and Ratchet Drive 10mm Wrench Mallet (rubber or plastic) 3mm Allen Key (included in kit) Instructions Double Adjustable Short Shifter 3mm Allen Key Notes: Make sure all components are clear of manufacturing residue and packing materials before installation. If you feel that you cannot properly perform this installation, we HIGHLY recommend you take the vehicle to a qualified mechanic. Please read them first before beginning the install. The following instructions should assist you through your installation process. Compatible with the factory shift knob or any aftermarket knobs designed to replace the factory unit.211315, 212315, 212317 - Subaru WRX Double Adjustable Short Throw Shifter Install InstructionsĬongratulations on your purchase of the COBB Tuning Double Adjustable Short Throw Shifter for the Subaru Impreza (5-Speed). This design allows easy independent adjustment of shift knob height and shifter throw length, while being strong enough to stand up to rowing through the gears with extreme enthusiasm. Steel socket head screws are set in a counter bore for a flush mount and provide clamping force to firmly hold the upper and lower slider shafts in place. Like our original design, the shift throw distance and shift knob height are independently adjustable and both can easily be adjusted with the shifter installed in the vehicle. Compatible with Factory or Aftermarket Shift Knobsĭesigned using CAD technology, the COBB Black anodized billet shifter body is CNC machined from 6061 Aluminum.
Throw – 10% longer to 25% shorter after cutting trim ring.This shifter has a “narrow barrel” and is for use in 2002-2007 cars that came with the Subaru factory short-shifter option. Our revolutionary Double Adjustable Shifter ushers in a new generation of adjustability for one of the most critical links from driver to car, the ability to control both the height of the shift knob as well as the length of the shifter throw.
0 kommentar(er)
